Help center & knowledge base

Start a conversation

G. Connector port (EXT2CP2)

Most of the cars have only one USB input, so normally you need to unplug your DAB+U if you want to connect an other device (for example your phone for charging). If you want to use a switch instead of this process, then you can go for the EXT2CP2 DAB+U Connector port. By using this accessory you don’t need to unplug anything, you can switch between the DAB+U and the second USB device with the mode switch.

The connector port has to be connected to the Round 9-pin connector of the DAB+U and the upper USB connector on the device. If the switch is set to DAB mode, the DAB+U is in active mode and you can listen to the DAB radio. When the switch is in USB position the DAB+U will be in bypass mode (DAB off) and you are able to access the content of the flash drive connected to the USB connector on the connector port – or the connected smartphone will be charged if the car supports it.





Choose files or drag and drop files
Was this article helpful?
Yes
No
  1. Dénes Turánszki

  2. Posted
  3. Updated

Comments